Supplies
Tools
- Embroidery needle
- Sewing needle
- Sewing machine
- Pencil
- Scissors
Materials
- Wooden napkin ring (with an interior diameter of 3.5 cm and a height of 4 cm)
- 4 x 4 cm piece of cloth for embroidering (not including the hem). ! : The square area of embroidery must be of the same height as the napkin ring.
- 12 x 5 cm piece of red material
- Embroidery thread
- Assorted sewing thread
Directions
Embriodery for the napkin ring
- Embroider initials on the cloth.
- Fold and mark on the upper, lower and side of the hem.
- Stitch on the piece of material, about 2 cm from the bottom, using a horizontal stitch above and below the embroidery along the folded hem.
- Tuck in the thread on the inside and secure it.
- With your nail, mark the hem and stitch along it.
Attach initials to the napkin ring
- Place the embroidery between the outside of the napkin ring and the material without embroidery.
- Move the outside of the material closer and cut it with small invisible points, so that the material will be tight enough so it doesn’t turn.
! : So that the stitches will be less visible, cut the embroidery by 5mm. Use the prominent edge to make the cuts
- Once the sewing is finished, slide in the piece of material and place the embroidery on the napkin ring. The sewing will disappear inside the ring.
