Kids' Slippers Pattern

Make the parts for the kids' slippers

• Download the patterns.
  NB: The patterns go up to size 30 (Europe)/size 12 (UK)/size 13 (U.S.), but the form is easily adapted for all little feet.

• Cut out the fabric:
  • for the upper, 4 times (2 for the outside and 2 for the lining).
  • for the back, 4 times (2 for the outside and 2 for the lining).
  • for the sole, 2 times.

• Sew the 2 outside pieces for the upper together, right sides together, along the less rounded side, 5 mm (1/16 inch) from the edge.

• Turn it right side out, press the fold, and sew it at 3 mm (1/32 inch) from the edge.

• Sew a zig-zag stitch along the unsewn side to hold the 2 layers together.

• Sew the 2 pieces for the back together, right sides together, along one of the long edges, at 5 mm (1/16 inch) from the edge.

• Turn it right side out, press the fold, and sew at 3 mm (1/32 inch) from the edge.
   
• Sew at 1.5 cm (5/8 inch) from the sewn edge so that you can slip an elastic through it.

• Sew a zig-zag stitch along the opposite side to hold the 2 layers together.

Assemble the kids' slippers

• Baste the upper and back to the slipper to the sole, right sides together, aligning the front and back of the slipper. In this inside-out mode, the fabric that forms the back of the opening will fall on the outside of the front section.

• Sew 5 mm (1/16 inch) from the edge and turn it right side out.

Final touches for the kids' slippers

• Pass a flat elastic through the back part of the slipper. Overlap the 2 ends of the elastic and sew them solidly together so that the fabric gathers slightly.

• Sew a button solidly onto the upper, passing through all of the layers, including the elastic.

• Make the second slipper in the same way.

Variations

• No lining: use thick cotton or wool fabric, depending on the season. You'll need to adjust the back part to be able to pass an elastic through it.

• All leather: without lining and with exterior seams.